Electro Voice Microphone RE510 User Manual

RE510  
Handheld Condenser  
Microphone  
KeyFeatures:  
5/8" diameter self biased condenser capsule  
offers the warmth of a larger capsule design  
without sacrificing off-axis performance or  
transient response  
Low-frequency roll-off switch enables  
tailoring of low-frequency response to meet  
application requirements  
Supercardioid polar pattern for superior  
feedback rejection and acoustic isolation  
Modern high-speed electronic design for  
extremely low distortion, and outstanding  
transient response  
High current differential output stage can  
drive long microphone cables without loss of  
performance  
Warm Grip handle for more comfortable feel  
Technical Specifications:  
Multistage pop filter eliminates breath pop  
Generation Element: Self-Biased condenser  
Frequency Response: 40 Hz to 20,000 Hz (see chart)  
Polar Pattern: Supercardioid (see chart)  
noises  
General Description:  
Sensitivity, Open Circuit 3.2mV/Pascal  
Voltage, 1 kHz:  
The RE510 is a professional quality hand-held condenser  
microphone that was designed especially for vocalists. The  
RE510 features a 5/8" diameter capsule, advanced  
electronic design, and best of all, a sound that will enhance  
any vocal performance.  
Clipping Level, 1 kHz: +2 dBV  
Maximum SPL, 1 kHz: 146 dB SPL (1% THD)  
Self Noise: 22 dB SPL “A” weighted (0 dB=20  
micropascals)  
The high frequency response of the RE510 has been  
designed to provide just the right amount of definition and  
“air” without the stridency so common in other condenser  
vocal microphones.  
Dynamic Range 124 dB  
(Maximum SPL to A  
Weighted Noise Level):  
Signal-to-Noise Ratio: 72 dB (@ 94 dB SPL)  
Output Impedance, 1 kHz: 250 ohms  
The low frequency response of the RE510 in combination  
with the low frequency selector switch provides versatility  
that was designed to be truly useful. With the low frequency  
selector switch in the rolled off position, the low end of the  
RE510 is tailored to compensate for proximity effect and  
provides full, clean sound without muddiness. When  
increased low-end is desired, placing the low frequency  
selector switch in the flat position adds just enough warmth  
to be noticeable, but not overbearing.  
Power Requirements: Phantom Supply Requirement: 24 to  
48 VDC  
Polarity: Positive pressure on diaphragm  
produces positive voltage on pin 2  
relative to pin 3  
Dimensions: Length = 7.15" (182 mm)  
Diameter = 2.0" (51 mm)  
Shank = 1.0" (25 mm)  
Accessories Included: 326 Stand Adapter (Black)  
Soft Zippered "Gig" Bag  
The wide bandwidth, high SPL handling capability, and low  
frequency selector switch of the RE510 also make it a  
versatile instrument microphone for most any application.  
Optional Accessories: 323S Stand Adapter  
376 Charcoal Windscreen  
379-1 Black Windscreen  
379-2 Red Windscreen  
The low frequency selector switch is securely located  
beneath the ball screen and can’t be changed inadvertently.  
Net Weight: 9.2 oz. (260 grams)  
 

Coleman Outdoor Fireplace 5065 700 User Manual
Craftsman Trimmer 35874535 User Manual
Craftsman Vacuum Cleaner 11317965 User Manual
Crate Amplifiers Musical Instrument Amplifier FXT65 User Manual
Delta Electronics Power Supply SILM730 User Manual
Ducane Gas Grill 31 3200 User Manual
Dynex Computer Hardware DX CRMN1 User Manual
Frigidaire Ventilation Hood FFMV154CLS User Manual
GE Dishwasher GDF510 540 User Manual
Generac Power Systems Portable Generator 5626 User Manual