Electro Voice Microphone N D367s User Manual

N/D367s  
N/DYM® Dynamic Cardioid  
Vocal Microphone  
Key Features:  
Classic N/DYM® sound  
Smooth, controlled frequency response  
High N/DYM® sensitivity  
Superior multistage shock mount and “Warm  
Grip” handle for unmatched low handling  
noise  
On/Off switch  
Also sounds great when used on a podium  
General Description:  
The Electro-Voice N/D367s is a member of a family of microphones  
that are manufactured with refinements that enhance the sonic  
smoothness, improve gain-before-feedback and provide more  
consistent performance with greater durability than earlier  
generations of N/DYM® microphones.  
Technical Specifications:  
The controlled response of the N/D367s allows the user to easily  
work the microphone for optimal performance.  
Element: Dynamic N/DYM magnet structure  
The N/DYM® magnet geometry used in the N/D367s, combined  
with a reinforced diaphragm design, creates a smooth, extended  
frequency response with a warm, open and transparent sound  
quality.  
The N/DYM® microphones feature EV’s AcoustiDYMTM shock -  
mount system. This unique vibration isolating system works as a  
multistage device. At low frequencies, a rear sound wave cancels  
the diaphragm motion, while, at high frequencies, the specially  
designed rubber shock mount isolates the transducer from motion.  
CombiningAcoustiDYMTM with the elastomeric Warm-GripTMhandle  
and the windscreen bumper produces an advanced technology,  
vibration isolating system which dramatically reduces all forms of  
handling noise for the most demanding situations.  
Freq. Response, Close: 30 Hz - 22,000 Hz  
Freq. Response, Far: 60 Hz - 22,000 Hz  
Polar Pattern: Cardioid  
Sensitivity, Open Circuit 3.0 mV/pascal  
Voltage @ 1 kHz:  
Dynamic Range: 144 dB  
Equivalent Output Noise: 14 dB A weighted  
(0 dB = 0.00002 pascal)  
Polarity: Positive pressure on diaphragm causes  
positive voltage on pin 2 ref. pin 3  
Impedance: 350 ohms balanced (low-z)  
Microphone Connector: 3 pin XLR type  
Finish: Non-reflecting black  
The N/D367s has a cardioid polar pattern, providing an enhanced  
front-area sensitivity and acoustic rejection directly behind the  
microphone, reducing feedback under live performance conditions.  
This is particularly useful with typical monitor speaker placement  
and high sound pressure (SPL) requirements. Additionally, the N/  
D367s’s polar patterns are unusually uniform with frequency,  
ensuring superior gain-before-feedback in live applications and  
superior isolation when used in the studio.  
Accessories Included: Mic Stand Adapter  
Soft Zippered "Gig" Bag  
Dimensions, Length: 7.12" (181 mm)  
Diameter: 2.05" (52 mm)  
Shank: 0.80" (20 mm)  
Net Weight: 9.1 oz (258 g)  
Shipping Weight: 18.9 oz (535 g)  
The N/D367s pop filter’s unique design utilizes a specially  
processed AcoustifoamTM filter to minimize wind noise and vocal  
P-pops. This design makes the pop filter an integral part of the  
microphone’s removable front grille assembly, allowing easy  
cleaning for continued top performance.  
The N/D367s also features a noiseless on/off switch, which is  
useful in giving the speaker/vocalist control of their signal to the  
mixer.  
 

EdgeStar Refrigerator CWR460DZ User Manual
Eiki Projector LC 180AR User Manual
Euro Pro Vacuum Cleaner NV31COS User Manual
Fisher Price Doll c5523 User Manual
Frigidaire Cooktop FFGC3015LB User Manual
FujiFilm Camera Lens YV33X15HR4A SA2 User Manual
Garmin Laptop G4 User Manual
GE Universal Remote 24929 User Manual
GE Waffle Iron 840085600 User Manual
Gigabyte Network Card GA 5EASV RH User Manual