GE Barcode Reader TS0861 User Manual

g
GE Interlogix  
TS0861 Magnetic Swipe Card Reader  
Installation Guide  
1 x TS0861 Magnetic Swipe Card Reader.  
1 x Installation Guide (this document).  
Installation Kit  
2 x 3x6mm post button head screws that can be used to  
replace the standard Phillips head screws for increased  
resistance to tampering.  
The TS0861 interfaces to the  
Product Features  
TS0862 Smart Door Controller.  
Operates from +5VDC supplied by  
TS0862, eliminates the need for extra  
power supply.  
Mounts on standard window or door  
frames (mullions or architraves).  
Inbuilt beeper and two access control  
LEDs.  
Standard Wiegand reader wiring  
colour scheme.  
Contents  
Part number — MAINST TS0861  
MAINST TS0861.doc, Issue 3, Dec. 2002  
 
 
Caution  
The TS0862 pwr link (or other supply) must be set to  
+5 volts.  
Using the holes provided on the base, mount the TS0861 to  
the metal window or door frame using suitable hardware  
(not supplied).  
Mounting  
Connections  
TS0861 Magnetic Swipe Card Reader Installation Guide  
3
 
 
Key to J2 wiring block on TS0862:  
EG = Egress.  
+
= 5V power supply, red wire.  
0V = LAN Ground — 0V connection, black wire.  
D0 = Data 0 — Clock connection to Reader, green wire.  
D1 = Data 1 — Data connection to Reader, white wire.  
L1 = LED 1 — Reader green LED, brown wire.  
See Door Data Menu.  
L2 = LED 2 — Reader red LED, orange or yellow wire. See Door Data  
Menu.  
BZ = Buzzer — Reader beeper, blue wire.  
Figure 1  
Connecting the TS0861 Magnetic Swipe Card Reader to the wiring block  
on the TS0862 Smart Door Controller  
TS0861 Magnetic Swipe Card Reader Installation Guide  
4
 
 
Note — LED operation is configurable via the TS0862 Smart  
Door Controller. Refer to the TS0862 Smart Door Controller  
Installation & Programming Guide for details.  
Testing  
The following process checks a typical installation of a  
TS0861 Magnetic Swipe Card Reader interfacing with a  
TS0862 Smart Door Controller.  
Check for correct operation:  
1. Set the door to the ‘Access’ state and check that the  
Green LED (LED 1) is illuminated.  
2. Swipe a suitable Magnetic Swipe Card through the  
TS0861. The Green LED flashes.  
3. Set the door to the ‘Secure’ state and check that the  
Red LED (LED 2) is illuminated.  
4. Swipe a suitable Magnetic Swipe Card through the  
TS0861. The Green LED flashes.  
TS0861 Magnetic Swipe Card Reader Installation Guide  
5
 
 
Notes  
TS0861 Magnetic Swipe Card Reader Installation Guide  
6
 
Notes  
TS0861 Magnetic Swipe Card Reader Installation Guide  
7
 
N4131  
Note — This product conforms to the standards set by Standards Australia on  
behalf of the Australian Communications Authority (ACA).  
This is a Class A product. In a domestic environment this  
product may cause radio interference, in which case the user  
may be required to take adequate measures.  
Warning  
The customer is responsible for testing and determining the  
suitability of this product for specific applications. In no  
event is GE Interlogix Pty Limited responsible or liable for  
any damages incurred by the buyer or any third party arising  
from its use, or their inability to use the product.  
Disclaimer  
Due to ongoing product development, the contents of this  
manual can change without notice. We make every effort to  
ensure the accuracy of this manual. However, GE Interlogix  
Pty Limited assumes no responsibility for errors or omissions  
in this manual or their consequences. Please notify us if you  
find errors or omissions.  
GE Interlogix Pty Ltd  
Technical Support  
646 Whitehorse Rd. Mitcham, Victoria 3132 Australia  
Phone +61 3 9259 4700  
Fax +61 3 9259 4799  
Hours are from 9:00 a.m. to 5:30 p.m., Monday to  
Friday (EST).  
Copyright © 2002 GE Interlogix Pty Ltd  
8
 
 

Eiki Projector LC NB2W User Manual
Eiki Projector LC NB4 User Manual
Eureka Dishwasher fdem 3101 User Manual
Everpure Water System CGS 55 20 User Manual
EVGA Computer Hardware 132 YW E179 User Manual
Fagor America Electric Pressure Cooker U40A01911 User Manual
Frigidaire Dishwasher FFBD2407B User Manual
Frigidaire Ventilation Hood PLHV42P8KC User Manual
Furuno SONAR FSV 30 User Manual
GE Heat Pump AZ39H12DAC User Manual